Table of Contents
Advertisement
Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Choose Computer (RGB(PC digital)) or Computer (RGB(AV HDCP)) by pressing the INPUT button on the
top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Top Control
INPUT button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
Use the Point
▲▼
then press the Point
item.
3
Use the Point
▲▼
or RGB(AV HDCP) and then press the SELECT
button.
Note:
• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.
• When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.49).
3
Computer1 ((RGB) /
(Component) / (Scart))
Computer (RGB(PC
digital) / RGB(AV HDCP) /
RGB(Analog))
Video
S-video
Network
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer and
button to access the submenu
►
buttons to select RGB(PC digital)
Remote Control
Computer (RGB(PC digital) /
COMPUTER button
RGB(AV HDCP) / RGB(Analog))
Input Menu
Computer
Computer1 ((RGB) /
(Component) / (Scart))
VGA
Advertisement
Table of Contents
