Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Choose Computer by pressing the INPUT button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
Use the Point
ed
then press the Point
Use the Point
ed
or RGB(AV HDCP) and then press the SELECT
button.
Note:
✔
• When the Input Search function is set to On1 or On, the
input signal will be searched automatically (p.47).
• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.
0
COMPUTER button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer (PC digital) /
(AV HDCP) /
(Analog)
buttons to select Input and
ed
or the SELECT button.
8
buttons to select Computer and
button.
8
buttons to select RGB(PC digital)
Top Control
INPUT button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer (PC digital) /
Input Menu
Computer
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
NTSC