Table of Contents
Advertisement
Computer Input
Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Direct Operation
Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Top Control
COMPUTER 2 can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
▲▼
then press the Point
items.
3
When Computer 1 is selected, use the Point
buttons to select RGB and then press the SELECT
button.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.48).
30
INPUT button
Computer 1
Computer 2
HDMI
Video
S-video
Network
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
button to access the submenu
►
Remote Control
Input Menu
▲▼
Computer
1
COMPUTER button
Computer 1
Computer 2
Advertisement
Table of Contents
