Product Description - Buderus Logano G315 Installation And Service Instructions Manual

2

Product description

2 Product description
NOTICE: Risk of system damage from use of
incorrect burner.
B Only use burners that meet the technical
requirements of the oil/gas-fired boiler
Logano G315 (
The oil/gas-fired boiler Logano G315 has been
developed and built employing the latest technologies
and safety regulations.
Particular emphasis is placed on ease of operation.
Please observe the safety instructions and the operating
instructions to ensure optimum safe, economical and
environmentally-friendly utilization of your system.
The main components of the Logano G315 oil/gas-fired
boiler are:
• Boiler block ( Fig. 1, [3])
The boiler block transfers the heat generated by the
burner to the boiler water.
• Boiler shell (jacket Fig 1 and 2, [1]), thermal
insulation ( Fig 1, [2])
The boiler jacket and thermal insulation minimize
energy loss.
• Control panel ( Fig 1, [4])
The control panel is designed to monitor and control all
electrical components of the oil/gas-fired boiler
Logano G315.
Observe all standards and guidelines
applicable to the installation and operation of
the system in your country.
Please observe the information on the boiler
rating plate. These are definitive and must be
observed.
To prevent boiler contamination, we
recommend installing a dirt trap in the water
system.
As a basic rule, flush existing systems before
connecting the boiler.
Install a desludging unit in the boiler return to
prevent damage to the boiler.
6
chapter 3, page 11).
4
2
3
1
Fig. 1 Oil/gas-fired boiler Logano G315
1 Boiler shell (jacket)
2 Thermal insulation
3 Boiler heat exchanger
4 Control Panel Assembly
1
1
Fig. 2 Front jacket
1 Boiler shell (jacket)
Logano G315 - Subject to technical modifications
1
6 720 642 622-01.1o
6 720 642 622-02.1o