Operating the Mini DVI Switcher
The input signal may need to be equalized depending on the length and quality of the DVI
cables that are being used. If, after connecting all equipment and powering on the system,
there is either no picture or video noise on the output display device, the signal may have to
be equalized.
For equalization, there are two EQ knobs on the front panel. Each EQ knob represents
each input. According to the length of the cable, the EQ knob should be adjusted.
Adjusting the Input Signal
Adjusts signal for
DVI In 1
Adjusts signal for
DVI In 2
page | 16
Configuring the Switcher