Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gefen EXT-MINIDVI-241N
Summary of Contents for Gefen EXT-MINIDVI-241N
- Page 1 Mini DVI Switcher 3GSDI Audio Embedder EXT-MINIDVI-241N User Manual Release A3...
-
Page 2: Important Safety Instructions
Mini DVI Switcher Important Safety Instructions GENERAL SAFETY INFORMATION Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this product near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 3: Warranty Information
Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. - Page 4 8:00 AM to 5:00 PM Monday - Friday, Pacific Time Mini DVI Switcher is a trademark of Gefen, LLC. Important Notice Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation without prior written notice. © 2013 Gefen, LLC. All Rights Reserved.
-
Page 5: Operating Notes
3GSDI Audio Embedder Mini DVI Switcher Operating Notes This page left intentionally blank... -
Page 6: Packing List
Packing List The Mini DVI Switcher ships with the items listed below. If any of these items are not present in your box when you first open it, immediately contact your dealer or Gefen. • 1 x Mini DVI Switcher •... -
Page 8: Table Of Contents
3GSDI Audio Embedder Mini DVI Switcher Table of Contents Getting Started Panel Layout ......................2 Front Panel ....................2 Back Panel ....................3 Bottom Panel ....................4 IR Remote Control Unit ..................5 Front ......................5 Back ......................6 Installing the Battery ..................7 Setting the IR Channel .................. -
Page 11: 01 Getting Started
Mini DVI Switcher 01 Getting Started Panel Layout ......................2 Front Panel ....................2 Back Panel ....................3 Bottom Panel ....................4 IR Remote Control Unit ..................5 Front ......................5 Back ......................6 Installing the Battery ..................7 Setting the IR Channel .................. 7 Installation ...................... -
Page 12: Panel Layout
Receives IR signals from the included IR remote control unit. Ext-IR Connect an IR Extender (Gefen part no. EXT-RMT-EXTIR) or RMT-2 remote (Gefen part no. EXT-RMT-2) to this port. Switching between Sources for more information. This LED will glow bright blue when the unit is powered and the currently selected input is DVI In 1. -
Page 13: Back Panel
Getting Started Sender Unit Layout Back Panel Name Description 5V DC Connect the included 5V DC power supply to this power receptacle. DVI In 1 Connect a DVI source to this port using one of the included DVI cables. DVI In 2 Connect a DVI source to this port using one of the included DVI cables. -
Page 14: Bottom Panel
Getting Started Sender Unit Layout Bottom Panel Name Description DIP switches These DIP switches are used to set the IR channel of the switcher as well as control the method of remote control (IR / contact closure). See Configuring the Switcher more information. -
Page 15: Ir Remote Control Unit
Getting Started IR Remote Control Unit Front Name Description Activity indicator This LED glows bright orange when a key is pressed on the remote. Buttons (1 - 2) Used to select the desired input. NOTE: If the Activity Indicator, on the IR remote control unit, flashes quickly while holding down any one of the buttons, then this indicates a low battery. -
Page 16: Back
Getting Started IR Remote Control Unit Back (shown with cover removed) Name Description DIP switch bank Use these DIP switches to set the IR channel of the remote. Primary battery slot Holds the battery for operating the remote. (shown without battery) Use only 3V CR2032-type batteries. -
Page 17: Installing The Battery
Getting Started IR Remote Control Unit Installing the Battery The IR remote control unit ships with two batteries. Only one battery is required for operation. The second battery is a spare. Use only 3V CR2032-type batteries. Remove the back cover the IR Remote Control unit. Insert the included battery into the primary battery slot. -
Page 18: Installation
Connect the included 5V DC power supply to the switcher, then connect the AC power cord to an available electrical outlet. Before operating this product, see DIP Switches for important configuration information. Sample Wiring Diagram DVI CABLE DVI Source DVI Source Switcher DVI Display EXT-MINIDVI-241N page | 8... -
Page 21: 02 Operating The Mini Dvi Switcher
Mini DVI Switcher 02 Operating the Mini DVI Switcher Configuring the Switcher ..................12 DIP Switches ....................12 Switching between Sources ................13 Using the Select button ................13 Using the IR Remote Control Unit ............... 14 Using the RMT-2 Remote ................15 Adjusting the Input Signal ................ -
Page 22: Configuring The Switcher
Operating the Mini DVI Switcher Configuring the Switcher DIP Switches On the bottom panel of the Mini DVI Switcher are a bank of 4 DIP switches. Remove the piece of colored tape to reveal the DIP switch bank. DIP switches 3 and 4 are used to set the IR channel of the switcher. -
Page 23: Switching Between Sources
Operating the Mini DVI Switcher Switching between Sources Page Title Using the Select button Make sure the Mini DVI Switch is powered. The Power LED should glow bright red if the unit is properly powered. Press the Select button on the front panel to toggle between DVI In 1 and DVI In 2. The active input will be indicated on the front panel. -
Page 24: Using The Ir Remote Control Unit
Operating the Mini DVI Switcher Page Title Switching between Sources Using the IR Remote Control Unit Point the IR remote control at the IR sensor on the front panel of the switcher. If an IR Extender is connected to the switcher, make sure to point the IR remote control unit at the IR sensor on the IR Extender. -
Page 25: Using The Rmt-2 Remote
(using an extension cable). The RMT-2 works on the principle of contact closure. The RMT-2 uses a 3.5mm mini-mono extension cable which may be purchased from Gefen Remove the IR Extender (if connected) from the Ext-IR port on the front panel. -
Page 26: Adjusting The Input Signal
Operating the Mini DVI Switcher Configuring the Switcher Adjusting the Input Signal The input signal may need to be equalized depending on the length and quality of the DVI cables that are being used. If, after connecting all equipment and powering on the system, there is either no picture or video noise on the output display device, the signal may have to be equalized. -
Page 29: 03 Appendix
Mini DVI Switcher 03 Appendix Specifications ...................... 20... -
Page 30: Specifications
Appendix Specifications Supported Formats Resolutions (max.) • 1920 x 1200 (WUXGA) • 1080p Full HD Electrical Maximum Pixel Clock • 165 MHz Power Indicator • 1 x LED, blue Link Indicator • 1 x LED, green Connectors Input (Sender) • 1 x DVI-I, 29-pin, female (digital only) Output (Receiver) •... - Page 32 Stretch it, Switch it, Split it, Control it. Gefen’s got it. ® 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com This product uses UL or CE listed power supplies.