Postscript Menu; Pcl Emul Menu - Lexmark MX810 Series User Manual

Understanding the printer menus
Use
Annotations
Do Not Print
Print

PostScript menu

Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Font Priority
Resident
Flash/Disk

PCL Emul menu

Use
Font Source
Resident
Disk
Download
Flash
All
Font Name
Courier 10
To
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Disable the SysStart file.
Note: Off is the factory default setting.
Establish the font search order.
Notes:
•
Resident is the factory default setting.
•
This menu item is available only when a formatted flash memory option
card or printer hard disk is installed and operating properly.
•
Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used by the Font Name menu.
Notes:
•
"Resident" is the factory default setting. Resident shows the factory
default set of fonts downloaded in the RAM.
•
"Flash" and "Disk" settings show all fonts resident in that option.
•
The flash option must be properly formatted and cannot be read/write‑,
write‑, or password‑protected.
• "Download" shows all the fonts downloaded in the RAM.
•
"All" shows all fonts available to any option.
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
234