Ordering A Maintenance Kit - Lexmark MX810 Series User Manual

Maintaining the printer
Item
Africa, Middle East, Central Eastern Europe (non‑EU), and Commonwealth of Independent States (CIS)
Toner Cartridge
High Yield Toner Cartridge
Extra High Yield Toner Cartridge
For more information on countries located in each region, visit www.lexmark.com/regions.
Item
Worldwide
Extra High Yield Toner Cartridge

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on
the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the
fuser.
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
•
The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and
can be individually ordered and replaced if necessary.
•
For more information on replacing the parts included in the maintenance kit, see the instruction sheet that
came with each part.
Lexmark Return Program fuser maintenance kit type
Type
MX810 Series Return Program fuser maintenance kit Type 00
MX810 Series Return Program fuser maintenance kit Type 01
MX810 Series Return Program fuser maintenance kit Type 02
MX810 Series Return Program fuser maintenance kit Type 03
MX810 Series Return Program fuser maintenance kit Type 04
Lexmark regular fuser maintenance kit type
Type
MX810 Series regular fuser maintenance kit Type 05
MX810 Series regular fuser maintenance kit Type 06
Return Program cartridge
625
625H
625X
Regular cartridge
620XA
Part number
40X8420
40X8421
40X8422
40X8423
40X8424
Part number
40X8425
40X8426
256