Lexmark MX810 Series User Manual page 130

Mx810 series
Hide thumbs Also See for MX810 Series:
Table of Contents

Advertisement

Faxing
Connected to different wall jacks
To connect:
1
Connect one end of the telephone cable that came with the printer to the
2
Connect the other end of the telephone cable to an active analog wall jack.
Tips for this setup:
If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically
(Auto Answer On).
Set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks
up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up
calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and
takes over the call.
PHONE
LINE
port of the printer.
130

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm7100 seriesMx811Mx812

Table of Contents