Table of Contents
Advertisement
Understanding the printer menus
Use
Activate Hex Trace
Coverage Estimator
Off
On
XPS menu
Use
Print Error Pages
Off
On
PDF menu
Use
Scale to Fit
Yes
No
Annotations
Do Not Print
Print
PostScript menu
Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Image Smoothing
On
Off
To
Assist in isolating the source of a print job problem.
Notes:
•
When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
•
To exit or deactivate Hex Trace, turn off or reset the printer.
Provide an estimate of the percentage coverage of toner on a page. The
estimate is printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
To
Print a page containing information on errors, including XML markup errors.
Note: Off is the factory default setting.
To
Scale page content to fit the selected paper size.
Note: No is the factory default setting.
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Allow users to disable the SysStart file.
Note: Off is the factory default setting.
Enhance the contrast and sharpness of low‑resolution images and
smoothen their color transitions.
Notes:
•
Off is the factory default setting.
•
Image Smoothing has no effect on images that are 300 dpi or higher
in resolution.
93
Advertisement
Table of Contents
