Vertical Cradle Mount; Wall Mount Bracket Template - Motorola Symbol DS6878 Product Reference Manual

1 - 12 Symbol DS6878 Product Reference Guide

Vertical Cradle Mount

When mounting the cradle vertically:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the convertible mount hook on the front of the cradle is inserted with the hook facing up. If not, remove
2.
and reverse the hook so that it is in position to secure the digital scanner in place. (See
for the location of the convertible mount hook.)
Ensure the desk/wall mount converter knob is in the position shown in
3.
Desk/Wall
Mount
Converter Knob
Vertical Mount - Inserting the Digital Scanner in the Cradle
Figure 1-8

Wall Mount Bracket Template

For your convenience, a wall mount bracket can be purchased from Motorola. Use the mounting holes on the Wall
Mount Bracket or see
For detailed instructions on mounting the cradle, refer to the CR0078-S/CR0008-S Quick Reference Guide (p/n
72-135874-xx).
Figure 1-9 for a Wall Mount Bracket Template to determine the location of the screw holes.
Figure 1-3 on page 1-4
Figure 1-8.