Replacing The Digital Scanner Battery - Motorola Symbol DS6878 Product Reference Manual

Replacing the Digital Scanner Battery

The battery is installed in the cordless digital scanner by the factory and resides in a chamber in the digital scanner
handle. To replace the battery:
Insert a Phillips screwdriver in the screw at the base of the digital scanner, then turn the screw
1.
counterclockwise to release the latch.
Remove the latch.
2.
If a battery is already installed, turn the digital scanner upright to slide the battery out. Disconnect the battery
3.
connector clip.
1
4
Inserting the Battery
Figure 1-6
With the contacts on the connector clips facing in the same direction, attach the new battery's connector clip to
4.
the connector clip in the base of the digital scanner.
Slide the new battery into the battery well and ensure the battery leads are visible. The battery should sit
5.
securely in the well.
Attach and close the latch.
6.
Insert a Phillips screwdriver in the screw at the base of the digital scanner, press down gently, and turn the
7.
screw clockwise to lock the latch in place.
2
5
Getting Started
3
Battery
Connector Clips
6
1 - 9