Nixdorf Beep/Led Options; Ignore Unknown Characters - Motorola Symbol DS6878 Product Reference Manual

7 - 18 Symbol DS6878 Product Reference Guide

Nixdorf Beep/LED Options

When Nixdorf Mode B is selected, this indicates when the digital scanner should beep and turn on its LED after a
decode.
*Normal Operation
(Beep/LED immediately after decode)
Beep/LED After CTS Pulse

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown
Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on the
digital scanner. When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent up
to the first unknown character and then an error beep sounds on the digital scanner.
Do Not Send Bar Codes with Unknown Characters
Beep/LED After Transmission
*Send Bar Code with Unknown Characters