Inserting Digital Scanner In The Cr0078-S/Cr0008-S Cradle; Horizontal Cradle Mount; Vertical Cradle Mount - Motorola DS6878 Product Reference Manual

1 - 14 DS6878 Product Reference Guide

Inserting Digital Scanner in the CR0078-S/CR0008-S Cradle

Horizontal Cradle Mount

When mounting the cradle horizontally, where no fastening is necessary:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the desk/wall mount converter knob is in the position shown in
2.
Desk/Wall Mount
Converter Knob
Horizontal Mount - Inserting the Digital Scanner in the Cradle
Figure 1-10

Vertical Cradle Mount

When mounting the cradle vertically:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the convertible mount hook on the front of the cradle is inserted with the hook facing up. If not, remove
2.
and reverse the hook so that it is in position to secure the digital scanner in place. (See
for the location of the convertible mount hook.)
Ensure the desk/wall mount converter knob is in the position shown in
3.
Desk/Wall
Mount
Converter Knob
Vertical Mount - Inserting the Digital Scanner in the Cradle
Figure 1-11
Figure 1-10.
Figure 1-3 on page 1-4
Figure 1-11.