Operation Method For Projector Engine (Pje) Mode - Sony KP-FR43M31 Service Manual

KP-FR43M31/FR43M91
RM-GA001
6. Write "VPS, VSZ and HSZ" adjusted data to other mode
service data.
<Write "VPS", "VSZ", "HSZ">
DRC1250
Normal
GEO(50)

3-12-4. Operation Method for Projector Engine (PJE) Mode

Commander Function (PJE mode)
category
+
+
Item
–
category
–
Read Data
from NVM
1. Functions of Keys on Commander
• 1 : Changes adjustment item. (item No. moves up)
: Marker moves clockwise from center to outside.
(in fine adjustment mode)
• 4 : Changes adjustment item. (item No. moves down)
: Marker moves counterclockwise from outside to
center. (in fine adjustment mode)
• : Changes data value. (up, down, or to the left or right)
(move) : Marker moves up, down, or to the left or right.
(in fine adjustment mode)
• 3 : Changes adjustment color.
(except item No. 00~38) GRN c BLU c RED
DRC1250
Normal
GEO(50)
DRC1250
Normal
GEO(60)
DRC1250
V COMP
GEO(50)
DRC120
Normal
GEO(60)
DRC100
V COMP
GEO(50)
DRC1250
V COMP
GEO(60)
HD
GEO(50)
DRC120
V COMP
GEO(60)
GEO(60)
write data to
NVM muting
Muting
1 2 3
4 5 6
change test pattern
7 8 9
Change fine
-
cursor mode
Enter
Data up/down
OK
Cursor Movement
• 6
• 9
•
(push)
Commander Function (PJE mode)
Button
% + -
7 + -
5 + -
2 + -
* : only data in the PJE mode.
Caution :
Do not use : Intial + Write ("Display" + "0" + "Mute" + "0")
HD
because all starting data is reseted to "0".
Note : If the value of over the limit value, adjust these in the
fine adjustment coarse data limit value.
2. Operation Method for Rough Adjustment
1. Set in the Service mode, and select the category "PJE".
2. Press "1" or "4" button on the commander to select the
item, and move " " up, down, or to the left or right to
change the data.
change color
3. Select item "GRN CENT". When BLU or RED is
displayed, press "3" button on the commander to change
the adjustment color in the order of GRN c BLU c RED.
4. In the GRN, BLU, or RED mode, move " " up or down
to change the data in vertical direction, or move " " to
the left or right to change the data in horizontal direction.
5. When it moves from PJE to other categories, repeat "1"
or "4" button and press it.
– 68 –
: Displays or changes internal test signals.
: monoscope c crosshatch + monoscope c
crosshatch + borderline c crosshatch c dot c
white pattern
: Switches adjustment mode.
carsor adjustment mode y fine adjustment mode.
: Switches marker moving method.
(in fine adjustment mode)
joystick key c 1 and 4 buttons
Mode Description
WRITE Writes data to NVM.
READ Reads data from NVM.
*PJE INITIALIZED ALL DATA.
INITIAL
Copies and writes data of
*PJE
COPY DRC1250 (50Hz) mode to all
other modes.
Item No. Data V-Frequency
PJE 00
FDIS |
Adjustment Item
Color Data (H) Data (V)
000 000
GRN
CENT
Adjustment Item
00 60
V-Frequency
60