Operation Method For Projector Engine Mode - Sony KDP-51WS655 Service Manual

2-12-3. OPERATION METHOD FOR
PROJECTOR ENGINE MODE
MUTING
Category up
Adjustment
item up
Adjustment
item down
Category
down
Initialize data
(Not stored)
Test Reset
MENU
RM-Y915
1. FUNCTION OF KEYS ON COMMANDER
1
Changes adjustment item. (Item # moves up)
Marker moves clockwise from center to outside.
(In Fine Adjustment mode)
4
Changes adjustment item. (Item # moves down)
Marker moves counter clockwise from outside to center.
(In Fine Adjustment mode)
2
Changes adjustment category.
(Category # moves up)
5
Changes adjustment category.
(Category # moves down)
Joystick Changes data value. (Up or down)
Marker moves clockwise from center
(up, down, right, and then left) to outside.
(In Fine Adjustment mode)
3
Changes adjustment color.
GRN BLU RED
6
Displays or changes internal test signals.
crosshatch + external signal
crosshatch + borderline
crosshatch only
dot only off
9
Switches adjustment mode.
Coarse adjustment model
Fine adjustment point mode
Fine adjustment row mode
Fine adjustment column mode
KDP-51WS655/57WS655
DISPLAY
POWER
Color Select GRN
to BLU to RED
Test signal select
crosshatch + video
signal dots + video signal
crosshatch + black dots
and black off
Mode Select
(Course Adjustment
Fine Adjustment)
ENTER
Press Switches marker moving method.
Joystick (In Fine Adjustment mode)
Pressing down on the joystick in Fine Adjustment mode switches
between selecting and un-selecting a point.
When a point is selected, the cursor changes to that color to indicate
the point is selected and can be adjusted. If a point is not selected the
cursor is white.
5 6 3 4
Joystick keys
Commander Function
Buttons Mode
0 + ENTER READ
MUTING+ENTER WRITE
7 + ENTER PJE
INITIAL
2. OPERATION METHOD FOR COARSE ADJUSTMENT
1. Enter the service mode and select "PJE".
2. Press the "1" or "4" button on the remote commander to select the
item, and then use the joystick to change the data.
Item No.
PJE 00 00
FDIS
Adjustment Item
3. Select "GRN CENT". When BLU or RED is displayed, press the "3"
button on the remote commander to change the adjustment color in
the order of GRN BLU
4. In the GRN, BLU, or RED mode, move the joystick 5 or 6to
change the data in vertical direction, or 3 or 4 to change the data
in a horizontal direction.
Data (H)
Color
GRN 000 000
CENT
Adjustment Item
5. Before returning to the service mode, press the "MUTING" +
"ENTER" buttons on the remote commander to write the data.
(You must complete step 5 to write the data. If you omit step 5 the
set data is returned to the data prior to the adjustment.)
KDP-51WS655/57WS655
1 and 4 buttons
Description
Reads data to NVM.
Writes data from NVM.
Service data initialization.
Not stored.
(Be sure not to use usually)
Data
60
Joystick
54 direction:Data up
63
direction:Data down
RED.
Data (V)
60
3
: Data (H) up
4
: Data (H) down
5
: Data (V) up
6
: Data (V) down
42