Method Of Cancellation From Service Mode; How To Adjustments; How To Write The Data; Memory Write Confirmation Method - Sony KP-FR43M31 Service Manual

KP-FR43M31/FR43M91
RM-GA001

3-10-2. Method of Cancellation from Service Mode

1. Set the standby mode (Press "!/1 (TV STANDBY)"
button on the commander), then press "!/1
(TV STANDBY)" button again, hereupon it becomes TV
Mode.

3-10-3. How to Adjustments

1. Set in the service mode, the following screen will
appear.
Category Name
Item No.
OSD 0
000Q 3.1M 0010 0000 20 00 00 0000
Suffix No.
Software
Version
2. Press "1" or "4" button on the commander to select the
adjustment item.
3. Press "3" or "6" button on the commander to change
the adjustment data.
4. Move " " up or down to select the adjustment category.
When move " " up (category up), service mode
changes in the order as shown below.
PIC YCTM
SOU YCTS
DRC YCTC
LUMA MCP
COLR DEF1
CLTY
DEF2
MIDE DEF3
CCPM DEF4
COMB DEF5
* : When it moves from PJE to other categorys,
repeat 1 or 4 button and press it.
Item Name Mode
50 : PAL, SECAM
60 : NTSC
Data
OSV 32 SERVICE 60 CH 6
Total Power On time
(Hours)
MID1 DDEV
MID2 PJE*
MID3 GRN
VSW AP
MSMO
CRNR
RNR OSDP
ASEL
BNR
SNNR VSEL
AWID PFID

3-10-4. How to Write the Data

1. Set in the service mode.
2. Press "1" or "4" button on the commander, select the
adjustment item, and press "3" or "6" button to change
the data.
3. Press "% (MUTE)" button on the commander and it will
indicate "WRITE" on the screen.
4. Press "-" button on the commander to write into
memory. (The "WRITE" display will be changed to red
color while executing, and back to "SERVICE".)
Commander Function (Except PJE mode)
Button
% + -
7 + -
8 + -
5 + -
2 + -
+ -
Note : Before changing to other modes, press "% (MUTE)"
+ "-" buttons on the commander to write the data.
(Omission of this operation causes the data to be
returned to the data before adjustment.)
: Confirm the adjustment mode before writing data for
data values because to vary in each adjustment
mode.
PFOP
: The adjustment item that there are no relations in the
adjustment is not to change data values because all
items are written in each adjustment mode.
GUID
POWR

3-10-5. Memory Write Confirmation Method

1. After adjustment, turn off the AC main power switch off.
OPM
2. Turn the power switch ON and set in the service mode.
3. Call the adjustment items again to confirm adjustments
OPB
were made.
SRV
OSD
MSP
TEXT
– 14 –
Mode Description
WRITE Writes data to NVM.
READ Reads data from NVM.
NORMAL All user control goes to the
standard.
INITIAL Service data initialization.
Not stored.
(Be sure not to use usually)
COPY Do not operate with a remote
commander.
WRT5060 (The data vary with among
mode.)