Sony KP-FR43M31 Service Manual page 229

Symptom
Abnormal color • Keep external speakers or other equipment away from the projection TV.
Do not move the projection TV while the projection TV is turned on.
patches
• Check the antenna cable and connection on the projection TV, VCR and at
TV cannot receive
the wall (see page 27).
stereo broadcast
sound. • Check the antenna setup. Contact a Sony dealer for advice.
or
Stereo broadcast
sound switches on
and off or is
distorted.
• Check the antenna cable and connection on the projection TV, VCR and at
Teletext display is
the wall (see page 27).
incomplete
(snowy picture or
• Check the antenna setup. Contact a Sony dealer for advice.
double images).
• Display the "Channel Setup" menu and set the "Signal Booster" to "Auto"
from "Manual Program" (see page 24).
• Use the fine tuning ("Fine") function (see page 24).
• Count the number of times the 1 (standby) indicator flashes.
The 1 (standby)
indicator on your Press ! (main power) to turn off your projection TV. Contact your nearest
projection TV
Sony service center.
flashes red several
times after every
three seconds.
• The "Signal Booster" is functioning to detect a weak signal. This does not
The projection
indicate a malfunction.
TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
• Some shooting games which involve pointing a light beam at the
Cannot play
shooting games. projection TV screen with an electronic gun or rifle cannot be used with
your projection TV. For details, see the instruction manual supplied with
the video game software.
• Change in room temperature sometimes make the projection TV cabinet
Projection TV
expand or contract, causing a noise. This does not indicate a malfunction.
cabinet creaks.
• This is the same static discharge that is felt when touching metal door
Static discharge is
felt when
handles or car doors especially when the air is dry, for example in winter.
touching the
This does not indicate a malfunction.
projection TV
cabinet.
• Use the fine tuning ("Fine") function (see page 24).
Lines moving
across the
projection TV
screen.
Solutions
Additional Information
31