Operation Method For Projector Engine Mode - Sony KP-44PS2 Service Manual

KP-44PS2/44PS2U/51PS2
RM-903
6-2-3. Operation Method for Projector Engine
Mode
MUTE
Write data to NVM
TV MODE
Copy data to all
mode
Adjustment item
up
Adjustment item
down
Read data from
NVM
JOYSTICK
VOLUME +
MENU
1. Functions of Keys on Commander
• 1 : Changes adjustment item. (item No. moves up)
: Marker moves clockwise from center to out-
side. (in fine adjustment mode)
• 4 : Changes adjustment item.
(item No. moves down)
: Marker moves counterclockwise from outside
to center. (in fine adjustment mode)
• v V b B : Changes data value. (up or down)
: Marker moves up, down, or to the left or right.
(in fine adjustment mode)
• 3 : Changes adjustment color.
(except item No. 00~77) GRN c BLU c RED
• 6 : Displays or changes internal test signals.
: crosshatch + external signal c dot + external
signal c crosshatch only c dot only c off
• 9 : Switches adjustment mode.
rough adjustment mode c fine adjustment
mode
• (OK): Switches marker moving method.
(in fine adjustment mode)
joystick (v, V, b, B) keys c 1 and 4 buttons
TV STANDBY
VIDEO TV
ON SCREEN
DISPLAY
Copy PAL data
to NTSC
Color change
1 2 3
4 5
6
Internal test signal
7 8 9
Initialize data
0 (Not stored)
Mode select
(Fine or Rough)
OK
PROGR
SCREEN
MENU
FORMAT
Wide
RM 903
Zoom
SONY
14 : 9
TV 4 : 3
Smart
RM-903
Commander Function
Buttons Mode
+ - WRITE
7 + - READ
5 + - PJE
INITIAL
2 + - PJE
COPY
+ - PJE
WRT5060
2. Operation Method for Rough Adjustment
1) Enter the Service menu, and select "Device Register Set-
ting" b "Projector Engine".
2) Press "1" or "4" button on the commander to select the
item, and press v, V, b, B key on the joystick to change the
data.
PJE
FDIS
Adjustment Item
3) Select "GRN CENT" . When BLU or RED is displayed,
press "3" button on the commander to change the adjust-
ment color in the order of GRN c BLU c RED.
4) In the GRN, BLU, or RED mode, v, V keys on the joystick
can change the data in vertical direction, or b, B keys in
horizontal direction.
Color
GRN
CENT
Adjustment Item
5) Before returning to the Service menu, press "
+"-" buttons on the commander to write the data.
(Omission of this operation causes the set data to be returned
to the data before adjustment)
6) Press "MENU" button on the commander to return to the
Service menu.
– 40 –
Description
Writes data to NVM.
Reads data from NVM.
Service data initialization. Not stored.
(Be sure not to use usually)
Copies and writes data of DRC1250
(50Hz) mode to all other modes.
Copies data of PAL mode to NTSC mode.
Item No.
Data
00 00
|
v, B : Data up
V, b : Data down
Data (H)
Data (V)
000 000
b : Data (H) up
B : Data (H) down
v : Data (V) up
V : Data (V) down
(MUTE)"