Installation; Getting Started - Sony KP-FR43M31 Service Manual

Installation

x Getting Started
Initial Setup
English
Language:
Select:
Confirm:
6
Installation
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the projection TV.
Tip
• You can also connect your projection TV to other optional
components (see page 27).
Step 3
Plug in the power cord, then press ! on the
projection TV to turn it on.
Note
• The 1 (standby) indicator flashes green for a few seconds
when turning on the projection TV. This does not indicate a
malfunction.
Step 4
Set up the projection TV by following the instructions
of the "Initial Setup" menu (see page 7).
End: WEGA GATE
1