Method Of Main Deflection Adjustment; Operation Method For Projector Engine (Pje) Mode - Sony KP-FS43M90 Service Manual

5-5-2. Method of Main Deflection Adjustment

1. Place the caps on the red and blue lenses so that only the
green color is displayed.
2. Enter the signal.
3. Set in the Service mode, and select the category "GEO".
4. Adjust "01 VPS" and "05 HPS" so that the picture is dis-
played in the center of screen.
01 VPS
05 HPS
5. Adjust "00 VSZ" and "04 HSZ" so that the picture size is
within the specification.
00 VSZ
04 HSZ
6. Adjust the following items so as to attain the optimum picture.
02 VLN
03 SCO
07 PAP
08 UPN
09 LPN
0A TRZ
5-5-3. Operation Method for Projector Engine
(PJE) Mode
Copy PAL data
to NTSC
Write data
to NVM
Adjustment item
up
Adjustment item
down
Read data from
NVM
1. Functions of Keys on Commander
• 1 : Changes adjustment item. (item No. moves up)
: Marker moves clockwise from center to out-
side. (in fine adjustment mode)
• 4 : Changes adjustment item.
(item No. moves down)
: Marker moves counterclockwise from outside
to center. (in fine adjustment mode)
• : Changes data value.
(up, down, or to the left or right)
(move) : Marker moves up, down, or to the left or right.
(in fine adjustment mode)
• 3 : Changes adjustment color.
(except item No. 00~38) GRN c BLU c RED
• 6 : Displays or changes internal test signals.
: crosshatch + external signal c dot + external
signal c crosshatch only c dot only c off
• 9 : Switches adjustment mode.
rough adjustment mode c fine adjustment
mode
• : Switches marker moving method.
(push) (in fine adjustment mode)
– 50 –
KP-FS43M90/FS53M90
RM-998
VIDEO
Up : Data up (V)
Left : Data up (H)
Down : Data down (V)
DRC-MF A/B
Right : Data down (H)
Push : Enter
HD/DVD
Copy data to all
mode
1 2 3
Color change
4 5 6
Internal test signal
7 8 9
Initialize data
0
(Not stored)
JUMP
Mode select
(Fine or Rough)
PROG
OPTION RESET
TV
RM-998
RM-998