Setting Up Your Projection Tv ("Initial Setup") - Sony KP-FR43M31 Service Manual

x Setting up your projection TV
("Initial Setup")
When you turn on your projection TV for the first time, the "Initial Setup" menu will
appear. You may change the menu language, preset the TV channels automatically,
sort or edit the channels and adjust the convergence using the buttons on the remote
control or projection TV front panel.
1
Press V or v to select the desired menu
language, then press
The selected menu language appears.
2
Press V or v to select "Yes", then press
to preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the "Program Sorting/Edit"
menu appears automatically on the screen.
To skip automatic channel presetting, select
"No", then press
If the message "No channel found. Please
connect cable/antenna" appears, check your
projection TV connections, then press
3
The "Program Sorting/Edit" menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the
current condition, press WEGA GATE
to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will
appear on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new
program number position for your
selected channel, then press B.
.
.
.
Initial Setup
Language: English
Select: Confirm: End:
WEGA GATE
Initial Setup
First please connect
cable/antenna
Start Auto Program now?
Yes
No
Select: Confirm: End:
WEGA GATE
Auto Program
Program: 01
TV System: Auto
VHF Low
End: WEGA GATE
Program Sorting/Edit
PROG Label Skip
01 Off
02
03
04
Off
05 Off
06
Off
Sorting: Edit:
Select: Confirm: Exit:
WEGA GATE
Program Sorting/Edit
PROG Label Skip
01
Off
02
03 01 Off
04
Off
05
Off
06
Off
Sorting mode
Select: Confirm: Exit:
WEGA GATE
continue
Installation
7