Operation Method For Projector Engine (Pje) Mode; Functions Of Keys On Commander; Operation Method For Rough Adjustment - Sony KP-ES43HK1 Service Manual

KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1,
ES53HK1/ME1/MN1/SN1,
6-5-3. Operation Method for Projector Engine
(PJE) Mode
MUTE
Write data to NVM
Copy data to all
mode
Adjustment item
up
Adjustment item
down
Read data from
NVM

1. Functions of Keys on Commander

• 1
: Changes adjustment item. (item No. moves up)
: Marker moves clockwise from center to out-
side. (in fine adjustment mode)
• 4
: Changes adjustment item.
(item No. moves down)
: Marker moves counterclockwise from outside
to center. (in fine adjustment mode)
• : Changes data value.
(up, down, or to the left or right)
(move) : Marker moves up, down, or to the left or right.
(in fine adjustment mode)
• 3
: Changes adjustment color.
(except item No. 00~38) GRN c BLU c RED
• 6
: Displays or changes internal test signals.
: crosshatch + external signal c dot + external
signal c crosshatch only c dot only c off
• 9
: Switches adjustment mode.
rough adjustment mode c fine adjustment
mode
• : Switches marker moving method.
(push) (in fine adjustment mode)
ES61HK1/ME1/MN1/SN1K
ON SCREEN
DISPLAY
Copy PAL data
to NTSC
Color change
Internal test signal
Initialize data
(Not stored)
Mode select
(Fine or Rough)
JOYSTICK
Up : Data up (V)
Left : Data up (H)
Down : Data down (V)
Right : Data down (H)
Push : Enter
RM-961
RM-961
Commander Function (PJE mode)
Button Mode
+ -
WRITE
7 + -
READ
5 + -
*PJE
INITIAL
2 + -
*PJE
COPY
+ -
*PJE
WRT5060
* : only data in the PJE mode.
joystick key c 1 and 4 buttons

2. Operation Method for Rough Adjustment

1) Set in the Service mode, and select the category "PJE".
2) Press "1" or "4" button on the commander to select the
item, and move "
PJE
FDIS
Adjustment Item
change the data.
3) Select item "GRN CENT". When BLU or RED is displayed,
press "3" button on the commander to change the adjust-
ment color in the order of GRN c BLU c RED.
4) In the GRN, BLU, or RED mode, move "
change the data in vertical direction, or move "
Color
GRN
CENT
Adjustment Item
left or right to change the data in horizontal direction.
5) When it moves from PJE to other categories, repeat "1" or
"4" button and press it.
– 64 –
Description
Writes data to NVM.
Reads data from NVM.
Service data initialization. Not stored.
(Be sure not to use usually)
Copies and writes data of DRC1250
(50Hz) mode to all other modes.
Copies data of 50 Hz (PAL) mode to
60 Hz (NTSC) mode.
" up, down, or to the left or right to
Item No.
Data
00 00
|
" up or down to
Data (H)
Data (V)
000 000
" to the