Disassembly Method; Rc-Bm5 - JVC RC-BM5 Service Manual

RC-BM5

Disassembly method

<Main body section>
Removing the handle
1. Lift the handle slightly.
2. While pressing the claws a of the rear cabinet
assembly in the direction of the arrow 1, slide the
handle in the direction of the arrow 2.
Removing the front cabinet assembly
and rear cabinet assembly
1. Remove the eight screws A retaining the front
cabinet and rear cabinet assemblies from the rear
of the main body. (See Fig.2.)
2. Open the cassette door. (See Fig.3.)
3. Remove the two screws B retaining the front
cabinet assembly. (See Fig.3.)
4. Slide the lower part of the front cabinet slightly in
the direction of the arrow 1. (See Fig.4.)
5. While removing the front cabinet assembly from the
cassette knobs and remove it in the upward
direction 2. (See Fig.4.)
6. Disconnect the speaker wire from the connector
CN205 on the phone jack board. (See Fig.5.)
7. Disconnect the parallel wire from the connector
CN302 on the main board. (See Fig.5.)
Phone jack board
CN205
CN302
1-6
(See Fig. 1.)
(See Figs. 2 to 5.)
Main board
Fig.5
Claw a
1
2
Fig.1
A
Rear cabinet assembly
A
Fig.2
B
Front cabinet assembly
Fig.3
Front cabinet assembly
2
1
Fig.4
Handle
Claw a
1
Rear cabinet assembly
A
A
Cassette door
Cassette knobs