Advertisement
XR-D400SL
Disassembly method
Removing the top cover (Figs. 1 & 2)
1. Remove the 4 screws A from both sides of the top cover.
2. Remove the 4 screws B from the rear of the top cover, then
remove the stop cover.
Removing the front panel (Figs. 3 to 5)
1. Remove the top cover.
2. Remove the 3 screws C that retain the front panel from the
bottom. (Fig. 3)
3. Unplug the connector A from the power supply board (Fig. 4)
and the flat wire from the control board (Fig. 5).
4. Disengage the 2 claws D from the front panel and remove
the front panel. (Figs. 4 and 5)
Removing the rear panel (Figs. 4 & 6)
1. Remove the stop cover.
2. Unplug connector B from the power supply board (Fig. 4).
3. Remove the 6 screws E from the rear panel (Fig. 6).
4. Remove the 2 screws F retaining the SCSI connector, then
remove the rear panel.
(CAUTION) Screw F retaining the SCSI connector functions to
protect the connector. Be sure to remove it as a
last task in disassembly or a first one in assembly.
Connector B
G
1-6
Front panel
Connector A
D
G
Fig. 4
Fig. 1
A
Fig. 2
Fig. 3
Flat wire
D
G
Fig. 5
A
B
B
C
G
Advertisement
