Rc-Bm5 - JVC RC-BM5 Service Manual

<Front cabinet section>
Prior to performing the following procedures,
remove the front cabinet assembly from the rear
cabinet assembly.
Removing the display board
From the inside of the front cabinet assembly,
remove the eight screws C retaining the display
board and then take out the display board.
Removing the right and left main
speaker assemblies
1. From the inside of the front cabinet assembly,
remove the six screws D retaining the right and left
main speaker assemblies.
2. Remove the solders from the soldered sections b
and c of the right and left main speaker
assemblies, remove the wires.
3. Take out the right and left main speaker
assemblies.
[Note]
After assembly, apply a locking agent to
the screws D.
Removing the right and left sub
speaker assemblies
1. From the inside of the front cabinet assembly,
remove the four screws E retaining the right and
left sub speaker assemblies.
2. Remove the solders from the soldered sections d
and e of the right and left sub speaker assemblies,
remove the wires.
3. Take out the right and left sub speaker assemblies.
[Note] After assembly, apply a locking agent to
the screws E.
Removing the cassette door damper
1. From the inside of the front cabinet assembly,
remove the two screws F retaining the bracket of
the cassette door damper.
2. Take out the cassette door damper.
[Note]
After assembly, apply a locking agent to
the screws F.
(See Fig. 6.)
C
(See Fig. 7.)
Front cabinet
assembly
Right main
speaker
D
Soldered
section b
(See Fig. 7.)
(See Fig. 8.)
Display board
C
Fig.6
Left sub speaker
D E
E
Right sub speaker
Soldered sections d
Fig.7
Front cabinet assembly
Cassette door damper
Fig.8

RC-BM5

C
C
Front cabinet assembly
Soldered sections e
E D
Left main
speaker
D
Soldered
E
section c
F
Bracket
F
1-7