Disassembly Method; Xl-Pm11/Xl-Pm1 - JVC XL-PM11 Service Manual

Disassembly method

Removing the cabinet -door & cabinet
-middle
1. Remove the two screws A attaching the cabinet -
door on the back of the body.
2. Remove the two screws B on the cabinet -bottom.
3. Remove the three screws C attaching the cabinet -
middle and remove the cabinet -middle from the
cabinet -bottom.
ONE POINT: Flexible board is bonded with couple-
face tapes internally in the cabinet -
middle.
4. Disconnect the flexible board from connector
FRW000 on the main board, and remove the cabinet
-door with cabinet -middle.
Cabinet -bottom (inside)
Main board
Fig.4
(See Fig.1 to 4)
A
Cabinet -bottom
Cabinet -door (inside)
Cabinet -middle (inside)
Cabinet -middle
Flexible board
FRW000
Fig.1
B
Fig.2
(The photograph is one of
C
Fig.3
(The photograph is one of
XL-PM11/XM-PM1
Cabinet -door
A
Cabinet -middle
B
Cabinet -bottom
the B and E version. )
C
C
the B and E version. )
1-5