Disassembly Method - JVC RC-BX33SL Service Manual

RC-BX33SL

Disassembly method

Removing the rear panel
1. From behind the body, remove the Five screws A
retaining the rear panel.
2. Open the Battery door, then remove One Screw B retaining in the battery compartment
bottom side.
3 Then remove the Two screws C retaining the bottom of rear panel.
4 Take out the rear panel from the body. And disconnect the CN302 on the main board
right side.
Note:
Be careful of the FM antenna white wire, it is connection with the tuner PCB up side.
You can directly take out from the tuner PCB.
When you re-assembly the product, plug the FM antenna white wire into the Tuner
PCB'S "FM ANT" position.
Screw A.
Screw C.
1-4
Screw B.
Screw A.
Screw C.