Connecting Parties - Siemens OpenStage15 User Manual

Basic functions
Step by step
Complete Xfer?
]
User
Configuration
Connected calls?
Allow call joining = Yes
Yes
Save & exit
50

Connecting parties

You can connect the first party with the party you con-
sulted, clearing down your connection to both parties in
the process.
Prerequisite: You are conducting a consultation call
page 47 and call joining is allowed
f
Select and confirm the option shown.
The active and held calls are joined. You are disconnect-
ed from the call.
or Connect by hanging up
n
or Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call joining
z You can also configure this setting via the Web interface
page 171.
N
Press the key shown.
Confirm.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select and confirm the option shown.
page 50.