Placing A Call On Hold - Siemens OpenStage15 User Manual

Enhanced phone functions
Step by step
Hold ?
Reconnect ?
74

Placing a call on hold

You can use this function to place an ongoing call on
hold, for instance, to prevent the other party overhear-
ing a conversation with a colleague in the same room.
Prerequisite: You are conducting a call.
f
Select and confirm the option shown in the connec-
tions's context menu.
or
S
Press the "Hold" key. The key lights up. (The "Hold" sen-
sor key must be configured
Retrieving a held call
l
Select and confirm the option shown in the connec-
tions's context menu.
or
R
Press the illuminated "Hold" key. (The "Hold" sensor key
must be configured
Using line keys
On multi-line telephones you can use the line keys to
place ongoing calls on hold.
R
Press the corresponding line key. The line key LED
starts flickering. The call is now on hold.
Retrieving a held call:
T
Press the corresponding line key. The line key LED
lights up. The call is retrieved.
The LED display
call is on hold to other multi-line telephones
where this line is also configured. These phones
can then pick up the call.
page 61.)
page 61.)
page 21 indicates that the