Administration - Siemens OpenStage15 User Manual

Getting to know your OpenStage phone
Interrupting editing in the menu
You can interrupt editing in the menu, for example, to call someone or to
answer a call. Then press the N key. This takes you back to the point in
the menu from which you exited.
This is however only possible for a limited period which is by service per-
sonnel using the inactivity timeout setting. If the configured time expires,
you need to reenter your password when opening the menu and manually
go to the required point in the menu.
Interrupting the editing:
•
•
To go back to editing mode in the menu, press the N key again.
Network information
Information about the IP address or name which was assigned to the
phone in the network and therefore the HTML address of the web inter-
face.
V
View information on the phone
Reset phone
V
Personal settings made via the telephone menu or the web interface can
be reset to factory settings

Administration

You can access the administration area via the "Admin" function and by en-
tering the administration password.
Refer to the administration manual supplied with your phone for more de-
tailed information on this topic.
30
By pressing the N key you interrupt the editing, leave the menu and
return to idle mode
If you receive a call during editing and you answer it, you automatically
change to the call view (see also
Contact your service personnel or refer to the OpenStage Adminis-
tration Manual for more on the network information values listed
here.
page 24.
page 27).
page 158
page 159.