Configuring A Fixed Forwarding Key - Siemens OpenStage15 User Manual

Programmable keys
Step by step
OK
Normal =
Forward all calls
Setting
Save & exit
66

Configuring a fixed forwarding key

S
Hold down the programmable key you want to assign a
function to until the programming prompt is displayed.
If the prompt is not displayed or a programmed
function is not executed, then you can only
launch key programming via the user menu (ask
your service personnel about the current set-
ting).
Confirm to begin programming. The sensor key illumi-
nates continuously.
z You can also configure this setting via the Web interface
page 171.
f
Select and confirm the option shown to program the
first level for instance.
f
Select a forwarding type:
• Forward all calls
• Forward no reply
• Forward busy
Select and confirm the required function.
f
Select and confirm this option to enter the forwarding
destination.
j
Enter and confirm the phone number of the forwarding
destination.
l
Select and confirm the option shown.