Connecting Parties - Siemens OpenStage15 Operating Manual

Step by step
Complete Xfer?
]
User
Configuration
Connected calls?
Allow call joining = Yes
Yes
Options = Save & exit

Connecting parties

You can connect the first party with the party you con-
sulted, clearing down your connection to both parties in
the process.
Prerequisite: You are conducting a consultation call
page 44 and call joining is allowed
f
Select and confirm the option shown.
The active and held calls are joined. You are disconnect-
ed from the call.
or Connect by hanging up
n
or
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call joining
z You can also configure this setting via the Web interface
page 149.
N
Press the key shown.
Confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select and confirm the option shown.
Basic functions
page 45.
45