Putting On Hold And Retrieving Successively Or Simultaneously - Siemens OpenStage15 User Manual

Step by step
Putting on hold and retrieving successively or
simultaneously
Putting an active call on hold
Prerequisite: You are conducting a consultation call
page 47 or have accepted a second call
The "Hold" sensor key must be configured
S
Press the "Hold" key. The key lights up. The consultation
or second call and the first call are put on hold.
Retrieving the first call
<
Switch to the first call.
R
Press the illuminated "Hold" key. You are connected
with the other party. The consultation or second call
continues on hold.
Retrieving the second call
:
Switch to the held consultation or second call
R
Press the illuminated "Hold" key. You are connected
with the other party. The first called is put on "Hold"
again.
Basic functions
page 78.
page 61
49