Displaying And Switching The Image - Christie LW650 User Manual

Operating

Displaying and switching the image

Press the COMPUTER button to select an input port for the
1.
RGB signal.
Each time you press the button, the projector switches its
RGB input port from the current port as below.
COMPUTER IN1
● While ON is selected for AUTO SEARCH item in OPTION menu, the
projector will keep checking every port sequentially till an input signal is
detected (
2, S-VIDEO, Component, HDMI or DVI-D port is selected, the projector will
check COMPUTER IN1 port first.
Press the VIDEO button to select an input for video signal.
1.
Each time you press the button, the projector switches its
video input port as below.
COMPONENT (Y, Cb/Pb, Cr/Pr)
● While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking every port sequentially till an input signal is detected (
If VIDEO button is pushed when COMPUTER IN1 or COMPUTER IN2 port is
selected, the projector will check Component port first.
Press the DIGITAL button to select an input for digital signal.
1.
Each time you press the button, the projector switches its
digital input port as below.
HDMI DVI-D
● While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking every port sequentially till an input signal is detected (
If DIGITAL button is pushed when Component, S-VIDEO, VIDEO 1 or VIDEO 2
port is selected, the projector will check HDMI port first.
Press the MY SOURCE button on the remote control. The
1.
input signal will be changed into the signal you set as MY
SOURCE(
● This function also can use for document camera. Select the input port that
connected the document camera.
L
COMPUTER IN2
47). If COMPUTER button is pushed when VIDEO 1, VIDEO
49).
BNC
S-VIDEO VIDEO 1
22
LASER
INDICATOR
STANDBY/ON MY SOURCE COMPUTER
STANDBY/ON MY SOURCE COMPUTER
VIDEO
ID 1 ID 3
VIDEO 2
47).
VIDEO
ID 1 ID 3
DIGITAL
ID 2 ID 4
47).
LASER
INDICATOR
STANDBY/ON MY SOURCE COMPUTER
VIDEO