Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally .
Indicators
WARNING
LAMP
POWER
TEMP .
red
green
Fig .1 Filter replacement icon and "Please wait... "
• • • on
• • • dim
• • • off
✔
Note:
• WARNING FILTER indicator does not work in the default state. It works when a filter cartridge (supplied) has been
installed in the projector.
DHD 700 User Manual
020-000114-01 Rev.1 (04-2009)
WARNING
SHUTTER
FILTER
blue
red
orange
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • •blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
LAMP 1/2
REP .
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
✽
STAND-BY button to turn on the projector.
The projector is operating normally.
✽
(The Shutter is open)
The projector is operating normally.
✽
(The Shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
✽
cannot be turned on until cooling is completed and
the POWER indicator lights green.
The projection lamp is being cooled down in the
✽
Power management mode.
The projector is in the Power management mode.
✽
The projection lamp is being cooled down in the
✽
Shutter management mode.
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
✽
projector.
✽
The filter is scrolled using the FILTER button on
the remote control or the Filter control function in
the setting menu. When the filter is being scrolled,
the Filter replacement icon and "Please wait... "
message (Fig. 1) appear on the screen.
Appendix
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)
✽
• • • Differs according to conditions.
77