Christie DHD700 User Manual page 61

Scrolls remaining . . Show the scroll counter and the Reset
options. When the filter scroll is counted
down to 1 (Scroll counter on the screen is
showing "0 scroll(s)" , the last scroll icon
(Fig. 3) appears on the screen. When the
filter scroll is counted down to 0, the Filter
cartridge replacement icon (Fig. 4) appears
on the screen and the WARNING FILTER
indicator lights orange, indicating that the
filter cartridge replacement is necessary.
To set a timer, press the SELECT button on Used time option.
Move the red arrow pointer to the timer setting option and use
the Point 7 8 buttons to select from (Off/1000H/2000H/3000H)
depending on the use environment.
When replacing the Filter cartridge, reset the Filter counter and the
Scroll counter (p.64).
✔
Note:
When a filter cartridge (supplied) has been installed in the
projector;
•Do not reset the Filter counter and the Scroll counter
without replacing the Filter cartridge. Be sure to reset the
Filter counter and the Scroll counter only after replacing
the Filter cartridge.
•Timer setting notifies that the filter needs replacement. To
replace the filter, use the filter control function (p.56).
Test pattern
Various test patterns are available for use when setting up the
projector.
Factory default
This function returns all setting values except for the user logo,
PIN code lock, Logo PIN code lock, lamp counter, filter counter
and filter timer to the factory default settings.
Quit
Exit the Setting Menu.
DHD 700 User Manual
020-000114-01 Rev.1 (04-2009)
Filter counter
Set the red frame pointer
to the item and press the
SELECT button.
Fig .1 Filter replacement icon
Filter replacement icon appears on the screen
at a set time.
Fig .2
Fig .3 Last scroll icon
Last scroll icon appears on the screen when
the filter is down to the last scroll.
Fig .4 Filter cartridge replacement icon
Filter cartridge replacement icon appears on
the screen when the filter scroll is counted
down to 0 scroll.
✔
Note:
When a filter cartridge (supplied) has been installed in
the projector;
•Fig.1, Fig. 2, Fig. 3 or Fig. 4 will appear at turning on
and selecting input source.
•Fig.1, Fig. 2, Fig. 3 or Fig. 4 will not appear when
the Display function is set to "Off" (p.49), or during
"Freeze" (p.30).
Factory default
Set the red frame pointer
to the item and press the
SELECT button.
Select Factory default and this box
appears. Select [Yes], and the next
box appears.
Setting
Off
Select [Yes] to
activate it.
61