Paper Feed / Separation Pressure Mechanism - Ricoh C252 Service Manual

6.7.3 PAPER FEED / SEPARATION PRESSURE MECHANISM

[A]
[A]: Standard position (35 to 81.5 g/m
[B]: Thick paper position (81.6 to 127.9 g/m
• The user can change the feed roller pressure by changing the position of the
pressure adjustment lever [A].
• If paper feed jams frequently occur, the lever should be moved to adjust the
pressure.
• If non-feed or multi-sheet feed problems still occur, the paper separation
pressure can also be adjusted using the separation pressure slider [C].
• The default position of the slider [C] is position 3.
• By loosening then moving the screws [D] up or down, the spring [E], which
applies pressure to the friction pad block [F], moves up or down. (This should be
done by a technician; !3.7.3)
• The default position of the screw [D] is at the lowest position.
SM
[B]
C252D030.WMF
[F]
[E]
2
, 9.3 to 21.6 lb.)
2
, 21.7 to 34.0 lb.)
6-25
PAPER FEED
[D]
[C]
C252D021.WMF
C252