Ricoh C252 Service Manual page 161

Tech Service Bulletin No. C252 – 003
SOLUTIONS:
For Cause 1:
1. Measure the distance from the paper edge to the black line (X mm).
2. Move the side fences a distance of about X mm, so that the edge of the paper aligns with the edge of the
original.
3. Check the print results. Repeat this until you cannot see the black line on the printout.
For Cause 2:
1. Decrease the image density setting,
or
2. Increase the magnification setting so that the original size matches the print paper size.
Page 2 of 2