Time/Date Setup; Setting Daylight Saving Time; Setting Current Time And Date - Honeywell 6280 Series User Manual

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
• When the time is set it is stored in the TouchCenter and sent to the control panel when you touch the Apply icon and answer
Yes to the following prompt. Additionally, when using the TouchCenter with a residential panel, the panel downloads its
time into the TouchCenter once an hour after the clock is set.
• If Get Time is pressed, the TouchCenter downloads the time and date from the control panel and exits the Set Time & Date
screen. Note: This icon

Setting Daylight Saving Time

To set the daylight saving time do the following:
ICON
1. Touch the Time/Date Setup icon; enter your Authorized Code.
2. Touch the DST icon if you want daylight saving time to affect your
system clock.
3. Set the "Start DST" time and then the "End DST" time by touching
the Month, Weekend and Hour that you want DST to start.
4. Touch APPLY to save the settings.

Setting Current Time and Date

To set the current time, do the following:
ICON
Press the Get Time icon (if available) to have the keypad download the time and date
from the control panel and exit the Set Time & Date screen.
Or, manually set the time as follows:
1. Touch the Month "arrow", and select the current month.
2. Touch the Year that is being displayed and enter the current year.
3. Touch the Hour that is being displayed and enter the current hour.
4. Touch the Minutes that is being displayed and enter the current
minute.
5. Press AM or PM. (Each depression switches the AM/PM display).
6. Press the MMDDYY "arrow", and select a format for which you want
the year to be displayed.
7. Press Apply.
User Setup (cont'd)
appears with residential panels and may not appear with all commercial panels.
ACTION
ACTION
If DST On is selected, the TouchCenter adjusts
for Daylight Saving time at the month, week and
time chosen
Make sure "DST On" is checked to enable this
feature.
After each selection the window closes
automatically and the selection is displayed.
Select if you want a 12-hour or 24-hour format
for your time display by touching the circle to
the left of the 12 Hour display.
A confirmation screen displays:
Set time on the security system as well?"
Yes saves the time changes in your security
system.
No saves the changes to the TouchCenter
only.
Note: A Yes response is recommended.
27
NOTES
.
NOTES
"Time Setting Confirmation
Yes or No