Clean Screen; Routine Care; System Information - Honeywell 6280 Series User Manual

Clean Screen

With the exception of normal cleaning, the TouchCenter is maintenance free. Clean the TouchCenter as follows:
ICON
1. From the "Home" screen, touch the Setup
icon.
2. Touch the Disp & Audio Setup icon.
3. Enter your "Authorized Code" if required.
4. Touch the CLEAN SCREEN icon to disable
the TouchCenter for 30 seconds so you can
wipe the screen clean.
5. Touch Continue to disable the touch screen.
6. Touch Cancel to exit.
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the TouchCenter or damage
to the touch screen may occur.

Routine Care

Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-
•
protected doors or windows.
• Keep dust from accumulating on the keypad and all protective sensors, particularly on motion sensors and
smoke detectors.
The keypad case and sensors should be carefully dusted with a dry soft cloth. Do not spray water or any other
•
fluid on the units.

System Information

You can view the latest software version installed on your system as follows:
ICON
1. From the "Home" screen, touch the Setup
icon.
2. Touch the System Info icon; the software
version is displayed on the screen.
Setup (cont'd)
ACTION
ACTION
NOTES
At the "Screen Disabled for =30 Seconds" screen, the touch screen should
be wiped clean of fingerprints using a mild soap solution and a soft cloth.
When the counter reaches zero, the window automatically closes and the
touch screen is active.
NOTE: The Emergency screen cannot be accessed while running in the
clean screen mode.
A pop-up window displays "Touch Screen becomes inactive so that you
may wipe the screen clean. Please use a damp, soft cloth. DO NOT use
any liquids, sprays, or ammonia-based cleaners. Press CONTINUE to
disable touchscreen."
**Panics cannot be initiated during this process**
21
NOTES