To Disarm Multi-Partitions Do The Following; How To Check The Status Of Other Partitions - Honeywell 6280 Series User Manual

To disarm the system when entering the premises:
The TouchCenter automatically displays the Entry Delay Active screen when you enter the premises:
ICON
1. Enter your 4-digit user code.
The partition is disarmed and the "Arming" screen
is displayed showing the system as Ready to Arm.
To disarm the system when already in the premises:
ICON
1. Press the Disarm icon.
2. Enter your 4-digit user code.

To disarm Multi-Partitions do the following:

ICON
1. From the "Home" screen, press the Security icon.
2. Press the Arm Multi-Partition icon.
3. Press the Disarm icon.
4. Enter your 4-digit user code.
5. Highlight the partition(s) to disarm and press
OK, or press ALL to disarm all partitions.

How to Check the Status of Other Partitions

This system supports between one and eight Partitions (depending on the system). Partitioning enables a single
physical alarm system to control up to eight areas of protection (partitions) depending on the system you have
purchased. Each TouchCenter keypad is assigned a default partition for display purposes, and shows only that
partition's information.
Note: A letter "H" following the partition name or number indicates that this is the default partition for the TouchCenter.
For example, if your physical site is a four-apartment housing unit, your alarm system may be configured with four
partitions. Each apartment's zones (door, windows, smoke detectors, etc.) are assigned to separate partitions, giving
each apartment independent arming/disarming control of its own partition (area). A landlord or manager may be
granted access to all partitions, so he/she can control the entire system.
Security (cont'd)
ACTION
Note: If you have a commercial system and a time window has been defined
for when you may disarm the system, the system does not disarm if you are
outside that time window.
ACTION
ACTION
NOTES
The keypad displays "Multi-Partition Arming".
14
NOTES
NOTES