How to Set the Time and Date
You can set the time and date from the Set Time & Date screen.
Pressing the Time and Date button located at the bottom of the
TouchCenter screen displays the Set Time & Date screen.
When the time is set it will be stored in the TouchCenter and sent
to the control panel when you press the Apply button and answer
Yes to the following prompt. Additionally, when using the
TouchCenter with a residential panel, the panel will download its
time into the TouchCenter once an hour after the clock is set.
If Get Time is pressed, the TouchCenter will download the time
and date from the control panel and exit the Set Time & Date
screen. Note: This button appears with residential panels only.
If DST On (Daylight Savings Time) is selected, the TouchCenter
will adjust for Daylight Savings time at the month, week and
Setting Daylight Savings Time
Press the Time and Date button located at the bottom of the screen
and do the following:
TouchCenter Setup (Cont'd)
1. On the "Time and Date" screen, press
the Month/Day/Year "arrow" button in the
"Settings" area of the screen. A drop-
down list displaying the Month/Day/Year
display formats is displayed.