Setup allows you to make changes to the way your TouchCenter is operating. You may access the Brightness and
Volume, Display & Audio Setup, System Setup (if enabled by your system installer), and System Information
from the "Setup" screen.
Brightness and Volume Control
ccess the "Setup" screen as follows:
From the "Home" screen, a
ICON
1. From the "Home" screen, touch the Setup
icon.
2. Move the Brightness/Volume slide bar up or
down to increase or decrease brightness/volume.
Display & Audio Setup
You may access Operating Modes, Languages, Backlight Off After time, To Homepage After time, Auto
Slideshow After time and Clean Screen from "Display & Audio Setup" screen.
Operating Modes
Operating modes provides access to Chime Mode, Voice Mode, and Voice Chime which allows you to turn the
TouchCenter chime mode and voice mode on or off.
• Chime Mode – TouchCenter chimes whenever a door or window is open.
• Voice Mode – TouchCenter voice annunciates whenever a change in system status occurs such as Armed,
Disarmed, or Alarms.
• Voice Chime – The chime mode and voice mode are in effect with the chime beeps followed by voice annunciation.
Access the "Operating Modes" screen as follows:
ICON
1
. From the "Setup" screen, touch the Disp &
Audio Setup icon.
2. Enter your "Authorized Code", if required.
3. Select Chime Mode or Voice Mode to turn
the mode on or off.
4. Touch the HOME or BACK icon after making
your selection.
Setup
ACTION
ACTION
NOTES
If you have made any changes in these settings, when you exit a Settings
Changed! pop-up window is displayed asking "Remember New Settings?"
Yes saves the change.
.
No discards the change
NOTES
If the Chime Mode and Voice Mode are both selected, then Voice Chime is
automatically selected.
It may take a few seconds for the Chime Mode to take effect.
When the TouchCenter exits the "Operating Modes" screen, your selection is
saved.
19