Console Emulation Mode; How To View The Event Log - Honeywell 6280 Series User Manual

Console Emulation Mode

Console Emulation Mode allows you to use a TouchCenter interface just as you would a regular system keypad. All
commands shown in Console Emulation mode can also be executed from a standard alpha keypad.
• It is recommended that you do not use the Console Emulation Mode to enter GOTO commands. Unsatisfactory
operation may result from issuing GOTO commands in Console Emulation.
• Two panics (1 & *, 3 & #, and * & #) do not function in the Console Emulation Mode. The A, B, C, and D
button
s do function if programmed as panic keys. Check with your system installer for details.
button
• Commercial systems with Alpha keypads have a feature where if you press a key for 5 seconds, you receive self
help messages about the pressed key or holding the * key for 5 seconds to provide zone descriptors. These features
do not function in the TouchCenter as all key presses are instantaneous.
How to Enter Console Emulation Mode
To access the TouchCenter "Keypad," do the following:
ICON
1. Touch the SECURITY icon.
2. Touch the MORE CHOICES icon.
3. Touch the CONSOLE MODE icon.

How to View the Event Log

Your system has the ability to record various events in a history log wherein each event is recorded with the time
and date of its occurrence. The control panel must be programmed to record various system events in the installer
programming mode. To view the Event Log, perform the following:
ICON
1. From the "Home" screen touch Security and
then the MORE CHOICES icon.
2. Touch the EVENT LOGS icon.
The first ten events are displayed.
3. Touch the SHOW MORE button to view all
items, and touch the up/down arrows to scroll
through the event log.
Security (cont'd)
ACTION
ACTION
NOTES
Perform functions as you would from a standard alpha keypad
NOTES
Note: While TouchCenter is requesting and receiving the event log data
from the control panel, the "Event Log" screen displays "Please Wait!".
The Next>> and <<Previous icons are shown for commercial panels only
when 100 or more events are in the log. They are not shown for
residential panels.
When All Partitions or All Events icon is pressed, and more than 100
events exist, the Next>> and <<Previous icons are displayed showing the
next 100 or previous 100 events.
17
.