Inverter Board - HP 1105 Maintenance And Service Manual

Inverter Board

Description
Inverter board
The inverter board is located on the left side of the computer. It is secured with two screws and has
three connectors.
To remove the inverter board:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Disconnect the three cables from the board (1).
NOTE:
pull on the wires.
4. Remove the two screws (2) that secure the board to the computer.
37).
Rear Cover on page
Be careful not to damage the cables when disconnecting them from the board. Do not
Preparing to Disassemble the Computer
38).
Spare part number
710541-001
Inverter Board 51