Inverter Board - HP Compaq 6000 Pro Maintenance & Service Manual

Inverter Board

The inverter board is located on the left side of the computer. It is secured with two screws and has
three connectors.
The inverter power cable is available using spare part number 643158-001.
Figure 7-39
To remove the inverter board:
1. Prepare the computer for disassembly (see
2. Remove the small rear cover (see
3. Remove the port cover (see
4. Remove the stand (see
5. Remove the drive cover (see
6. Remove the memory cover (see
7. Remove the upper rear panel (see
8. Remove the I/O panel (see
9. Remove the outer/left panel (see
10. Remove the two screws (1) that secure the board to the computer.
Inverter board location
Port Cover on page
Stand on page
Optical Drive on page
Memory on page
Rear I/O Cover on page
Outer/Left Rear Panel on page
Preparing to Disassemble the Computer on page
Small Rear Cover on page
45).
46).
47).
53).
Upper Rear Panel on page
67).
44).
55).
75).
Inverter Board
43).
81