Figure 14: Lacp Port Configuration - Edge-Core ECS4310-26T Management Manual

Current LACP Port Configuration
Port – Port identifier. (Range: 1-26)
◆
LACP – Indicates ports that are enabled as LACP ports and if they are
◆
passive or active.
Aggregated – Indicates ports in a trunk that are members of an active
◆
link.
W I
EB NTERFACE
To configure LACP settings:
Click Configuration, Link Aggregation, LACP Setting.
1.
Enable LACP on the switch.
2.
Specify the LACP System Priority to identify LAGs on the switch.
3.
Click Apply.
4.

Figure 14: LACP Port Configuration

– 55 –
| Link Aggregation
C 6
HAPTER
Configuring LACP