Configuring Vlan Attributes For Port Members; Figure 16: Vlan Port Configuration - Edge-Core ECS4310-26T Management Manual

| Creating VLANs
C 7
HAPTER

Configuring VLAN Attributes for Port Members

C VLAN A
ONFIGURING
P
TTRIBUTES FOR ORT
You can configure VLAN attributes for specific interfaces, including the
default Port VLAN identifier (PVID).
P
ARAMETERS
The following parameters are displayed on the VLAN Setting page:
Port - Selects one or more ports or trunks to configure. Hold down the
◆
Ctrl key and click port numbers to selelct multiple ports. Hold down the
Shift key to select a range of ports.
PVID - The VLAN ID assigned to untagged frames received on the
◆
interface. (Range: 1-4095; Default: 1)
Ports must be a member of the same VLAN as the Port VLAN ID.
W I
EB NTERFACE
To configure attributes for VLAN port members:
Click Configuration, VLAN, VLAN Setting.
1.
Select one or more ports or trunks to configure.
2.
Configure the required PVID setting.
3.
Click Apply.
4.

Figure 16: VLAN Port Configuration

– 60 –
M
EMBERS