Table of Contents
Advertisement
22
P
S
ORT
TATISTICS
You can display standard statistics on network traffic passing through each
port. This information can be used to identify potential problems with the
switch (such as a faulty port or unusually heavy loading).
All values displayed have been accumulated since the last system reboot.
P
ARAMETERS
The following parameters are displayed on the Port Statistics Information
page:
Port — The port number.
◆
State — Displays the link state of port interfaces (Enabled or Disabled).
◆
Link Status — Displays the link state of the port interface (Link Up or
◆
Link Down).
TxGoodPkt — The total number of packets transmitted out of the
◆
interface.
TxBadPkt — The total number of outbound packets that could not be
◆
transmitted because of errors.
RxGoodPkt — The total number of packets received on the interface.
◆
RxBadPkt — The total number of inbound packets that contained
◆
errors preventing them from being deliverable.
Clear — Click the button to reset all counters.
◆
– 119 –
Hide quick links:
Advertisement
Table of Contents
